
Smoke Grey & gold
Soft, smoky glow. Quiet and modern against white or greige walls.
The Woorglamp Nastrella is a glass ribbon wall sconce, Ø7.9" × H10.2" (Ø20 × H26 cm). Three tiers of curved, textured glass ribbons loop over a slim frame, and three hidden bulbs inside turn the whole sconce into a warm lantern on the wall. Hang a pair beside a mirror or a row up the stairs.
One size, eight finishes, three bulbs. The two things worth settling before you order are the height on the wall and whether you want one, a pair or a row.

At just over 10 inches tall, Nastrella is sized to frame things: a mirror, a mantel, a bed. The real questions are how high and how many; both are drawn below.
Measure from the floor to the middle of the sconce (152 to 168 cm). Beside a mirror, set the center at about eye level; on stairs, measure from the step below.
One for a narrow wall or a landing. A pair either side of a mirror, mantel or bed. A row up the stairs or along a hall, one every 6 to 8 ft.
Each sconce is hardwired to its own wall junction box and runs from your wall switch, so fix the positions before the electrician arrives.
With three bulbs inside, the glass decides everything: how much light reaches the wall and what color it is when it gets there.

Soft, smoky glow. Quiet and modern against white or greige walls.

The warmest look: honey-colored light like a lantern at dusk.

Deep bottle green. Rich in libraries, studies and dark-wood rooms.

The brightest option. Pure sparkle and the most light on the wall.

Smoky glass on a black frame. The most graphic of the eight.

Warm amber held by a dark line. Classic, a little industrial.

Green glass with matte black for a moody, collected room.

Crisp and bright, with the black frame drawn through the glass.
Warm, low-sheen gold on the frame and wall plate. Behind the glass it half disappears, so the sconce reads as one mass of color. The easy choice with warm metal hardware, wood and cream walls.
Matte black that keeps its own line, so the frame shows through the ribbons like a drawing. Pairs with black fixtures, steel frames and dark paint.
The bulbs sit at the heart of the sconce, out of sight from every angle. Before light leaves the fixture it passes through at least one curved, textured ribbon, so the wall glows instead of the bulbs.

Lights on · hover for offLights off
Three tiers of textured ribbons on a slim frame. Even unlit, it looks like a piece of art glass on the wall.
Every ribbon catches the hidden bulbs at its own angle, so the whole sconce shimmers and washes the wall above and below.
Tip: hanging a pair or a row? Use the same bulbs in each, same brand and same color temperature, so they glow as one.
Every piece of glass is the same idea: a thick ribbon, pinched at the waist, folded over the frame. Repeat it across three tiers and you get a lantern with no straight line anywhere on it.
Three things make the whole sconce. Here is each one at close range: what it is, and what it does for the light.

Thick enough to hold its shape and worked while hot, so the hourglass curve runs through the whole ribbon. No two ribbons on a sconce are identical.

A rippled surface and tiny trapped bubbles break the light into countless small reflections, so the glow never looks flat and the glass looks rich even when off.

A solid iron wall plate carries three E14 sockets, and curved arms hold the tiers around them, so the bulbs stay hidden at the heart of the glass.
The ripples and seed bubbles are formed while the glass is soft, so they run through each ribbon instead of sitting on its surface.

Thick textured glass does all the optical work: refracting, scattering and coloring the light. The frame does none of it. On a fixture this close to eye level, that division keeps it calm.
Designed to hold its own as an object, whether the sconce is on or off.
A sconce this size is planned by number as much as by room. Four places it works, and whether to order one, a pair or a row.

One every 6 to 8 ft up the wall gives a steady rhythm of light on every step.

Either side of a console and mirror, so the first thing guests see is a warm glow.

Flanking the bookcase as accent light; green glass looks rich against dark wood.

One either side at eye level for even, flattering light on the face.
Four stages stand between the furnace and the finished sconce: melted, cooled, finished by hand, then assembled and tested. The cooling is never rushed; the strength and clarity of the glass depend on it.
Molten glass is gathered from the glowing furnace on a long steel rod, the color already in the melt.
The shaped ribbons travel slowly through a warm kiln, so the glass cools evenly and stays strong.
Each ribbon is checked with calipers and its edges are smoothed by hand, ready to sit on the frame.
The ribbons are fitted to the frame tier by tier, and every sconce is switched on and checked before it ships.
The ten questions people ask most before ordering a wall sconce like this.
Aim for 60 to 66 in (152 to 168 cm) from the floor to the center of the sconce. Beside a mirror, set the center at about eye level; on stairs, measure from the step below.
One suits a narrow wall or a landing. A pair frames a mirror, mantel or bed. Along stairs or a long hall, hang a row with one every 6 to 8 ft.
Usually 30 to 40 in (76 to 102 cm) between centers beside a mirror, or so each sconce sits 3 to 6 in beyond the edge of the mirror, mantel or headboard.
Clear gives the most light; Amber the warmest; Smoke Grey the softest; Green the richest. Gold metal blends into the glass, black draws a crisp line through it.
Very close. Because each ribbon is shaped by hand, the texture, bubbles and depth of color vary slightly from piece to piece. That is part of its character.
Three E14 LED bulbs (European small screw base, not E12). Small, low-heat LED bulbs suit the glass best.
No. Bulbs are not included, so you can choose the brightness and color temperature you prefer.
It depends on the bulb you choose. 3000K matches the photos; 2700K gives a deeper, cozier glow; 4000K looks cooler and makes the glass read grayer.
It is hardwired to a standard wall junction box and runs from your wall switch. Works with 110–220V. We recommend a licensed electrician.
Switch off and let it cool, then wipe the ribbons and frame with a soft dry or slightly damp cloth. Avoid abrasive cleaners on the metal finish.
Write to us before you order and we will help with spacing, quantities and finishes.
You May Also Like

$158.00

$190.00

from$1,699.00

from$1,592.00

from$1,280.00

$239.00

from$390.00

$1,015.00from$740.00

$595.00

$405.00

$1,330.00from$810.00

from$410.00

from$1,070.00

$2,093.00from$1,515.00

from$911.00

$910.00

$1,170.00from$601.00

$343.00

from$360.00

from$1,700.00

$1,315.00

$1,100.00$800.00

$700.00from$483.00

$890.00from$610.00

$1,330.00from$905.00

$650.00

$675.00from$465.00

from$480.00

$1,470.00$995.00

from$425.00
Complimentary shipping on all orders across the United States
Shop with confidence with our hassle-free return policy
Your transactions are protected with industry-leading encryption
Each piece is meticulously handcrafted by skilled artisans
The more you light up, the more you save. Copy a code below and use it at checkout.
Tap a code to copy. One code per order, not combinable. Valid through Nov 30, 2026.